Application and Innovation of 3D Printing in Medical Equipment Maintenance
Main Article Content
Keywords
3D printing, Medical equipment, Maintenance, Innovate
Abstract
With the continuous progress of technology, 3D printing technology is setting off a revolution in medical equipment maintenance. The traditional supply chain and manufacturing process often lead to long maintenance times and high medical equipment costs. However, after the introduction of 3D printing technology, medical equipment maintenance will usher in a brand-new solution. Through 3D printing, medical institutions can manufacture the required parts independently, without relying on suppliers' delivery, thus greatly shortening the maintenance time. In addition, 3D printing can also be customized and optimized according to specific needs, improving the functionality and performance of medical equipment. Therefore, the application innovation of 3D printing in medical equipment maintenance will bring great potential and opportunities to the medical industry and provide better medical services for patients. This innovation will make medical equipment maintenance faster, more economical, and efficient, and meet individual needs, bringing unprecedented development opportunities for the medical industry.
Downloads
References
2. Zhu L, Lu, Bao Z, et al. Application and development trend of 3D polymer material printing technology in medical field [J]. Plastic Addit 2022;32(2):62-65.
3. Cao L, Wang T, Bin L, et al. Advances in applying 3D printing technology in brachytherapy for cervical tumors [J]. China Med Appl 2023;38(2):165-169,180.
4. Li J, Li J. Application prospect analysis of 3D printing in medical devices [J]. New Mat Ind 2022;(2):5.
5. Li D, Cui W, Liu B. Application of three-dimensional printing technology in medical field [J]. China Med Appl 2018;33(9):6. DOI: CNKI: Sun: YLSX.0.2018-09-032.
6. Lee J, Co D-W. 3D Printing Technology Over a Drug Delivery for Tissue Engineering[J]. Curr Pharmaceut Design 2015;21(12):1606-1617.
7. Alhnan MA, Okwuosa TC, Sadia M, et al. Emergence of 3D Printed Dosage Forms: Opportunities and Challenges[J]. Pharmaceuti Res 2016;33(8):1817-1832. DOI:10.1007/s11095-016-1933-1.
8. Yu D. 3D printing: customized medical repair [J]. Metal World 2016;(1):21-28. DOI: 10.3969/J. ISSN.1000-6826.2016.01.06.
9. Xu L, Zhang H Wu S, et al. Application of three-dimensional printing technology in medical device maintenance [J]. China Med Appl 2016;31(3):114-117. DOI: 10.3969/J. ISSN.1674-1633.2016.03.030.
10. Shen L, Sun J, Huang Z. Research on medical equipment maintenance based on 3D printing technology [J]. Digital Design (Ⅰ) 2017;6 (4):138-141. DOI: 10.19551/j. CN Ki. ISSN 1672-9129.2017.07.052.
11. Qiu J, Ning X, Zou Q. The past, present and future of 3D printing technology in spinal surgery [J]. China Med Appl 2021;36(11):164-169.
12. Wang D, Feng M, Chen Q, et al. Application and development research of medical image technology based on 3D printing technology [J]. New Gen Info Technol 2021;4(2):20-25.
13. El Magri A, Vanel S, Vaudreuil S. An overview on the influence of process parameters through the characteristic of 3D-printed PEEK and PEI parts[J]. High Perform Poly 2021;33(8):862-880. DOI:10.1177/09540083211009961.
14. Li Y, Yang Y, Chen X. Using 3D printing technology to repair GlideScopeRanger video laryngoscope [J]. Chinese Med Equip J 2019;40(10):107-108.
15. Bi S, Zhang G, Hou R, et al. Comparative study of three-dimensional modeling technology and implementation methods [J]. J Wuhan Uni Technol 2010;(16):6. DOI: CNKI: SUN: WHGY.0.2010-16-008.
16. Ge Q, Xu D, Zhao R, et al. Research on the application of 3D printing technology in clinical engineering [J]. China Med Equip 2017;14(5):3. DOI: 10.3969/J. ISSN.1672-8270.2017.05.001.
17. Autodesk official website. How to Determine the Safety Factor [EB/OL]. [cited on October 17, 2024]. Available at: https://www.autodesk.com.cn/support/technical/article/CAAS/SFDCARTICLES/CHS/how-to-determine-the-factor-of-safety-s.html.
Article Sidebar
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Author(s) must obtain all parties consent [co-author(s), others if applicable] and submit the acceptance of Copyright Agreement with their paper. Written permission must be obtained by the author for material that has been published in copyrighted material; this includes tables, figures, and quoted text that exceeds 150 words. A copy of all permissions must accompany the manuscript when published in copyrighted material. The author(s) hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. Author(s) must clearly indicate that approval for publication has been received in cases of institutional ownership.
In all submitted material authors retain all copyrights; however, the GlobalCE Journal reserve the right to reprint all or portions of the article and to post all or part of the article online. GlobalCE Journal reserves the right to edit manuscripts as required to publish in the journal. Authors are responsible for obtaining any and all clearances as appropriate. Unless stated otherwise, all articles are open-access and distributed under the terms of the Creative Commons Attribution License (CC BY 4.0) which permits unrestricted use, distribution, and reproduction in any medium, provided the original author(s) and original work (e.g. first published in the Global Clinical Engineering Journal) is properly cited with the original URL and bibliographic citation information. The complete bibliographic information, a link to the original publication on www.Globalce.org well as the copyright and license information must be included. No use, distribution or reproduction is permitted which does not comply with these terms.