Analysis and Solution of Dental Unit Failure
Main Article Content
Keywords
dental unit, failure, solution, Maintenance
Abstract
Objective: To discuss and analyze the common causes of dental unit failures and summarize maintenance experiences.
Methods: The failures were studied through retrospective analysis in our dental clinic from January 2019 to December 2019. Causes for four common failures were analyzed deeply, and the corresponding improvement solution was implemented.
Results: These solutions reduced the failure rate for dental units and improved understanding of the importance of using and maintaining the equipment correctly.
Conclusion: Analysing and improving proper maintenance can save costs for the hospital and effectively enhance the management level of medical equipment maintenance.
Downloads
Article Sidebar
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Author(s) must obtain all parties consent [co-author(s), others if applicable] and submit the acceptance of Copyright Agreement with their paper. Written permission must be obtained by the author for material that has been published in copyrighted material; this includes tables, figures, and quoted text that exceeds 150 words. A copy of all permissions must accompany the manuscript when published in copyrighted material. The author(s) hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. Author(s) must clearly indicate that approval for publication has been received in cases of institutional ownership.
In all submitted material authors retain all copyrights; however, the GlobalCE Journal reserve the right to reprint all or portions of the article and to post all or part of the article online. GlobalCE Journal reserves the right to edit manuscripts as required to publish in the journal. Authors are responsible for obtaining any and all clearances as appropriate. Unless stated otherwise, all articles are open-access and distributed under the terms of the Creative Commons Attribution License (CC BY 4.0) which permits unrestricted use, distribution, and reproduction in any medium, provided the original author(s) and original work (e.g. first published in the Global Clinical Engineering Journal) is properly cited with the original URL and bibliographic citation information. The complete bibliographic information, a link to the original publication on www.Globalce.org well as the copyright and license information must be included. No use, distribution or reproduction is permitted which does not comply with these terms.